Arbitrary Function

The AFG31051 is a high-performance AFG with built-in arbitrary waveform generation, real-time waveform monitoring, and the largest touchscreen on the market. Providing advanced waveform generation and programming capabilities, waveform verification, and a modern touch-screen interface, the new AFG31051 is sure to delight and simplify the job of every researcher and engineer.
Key performance specifications

• 1 channel
• Output amplitude range 1 mVP-P to 10 VP-P into 50 Ω loads

Basic (AFG) mode

• 50 MHz sine waveforms
• 14-bit vertical resolution
• Built-in waveforms include sine, square, ramp, pulse, noise, and other frequently used waveforms
• Sweep, Burst, and Modulation modes (AM, FM, PM, FSK, and PWM)

Advanced (Sequence) mode

• Continuous mode (optional Sequence, Triggered and Gated modes)
• 16 Mpts arbitrary waveform memory on each channel (128 Mpts optional)
• Up to 256 steps in sequence mode with loop, jump and wait events
• Variable sampling clock 1 µSa/s to 2 GSa/s

Features and benefits

• Patented InstaView™ technology enables engineers to see the actual waveform at the Device Under Test (DUT) in real time, without the need of an oscilloscope and probe, eliminating the uncertainty caused by mismatched impedance Sequencing option adds the ability to program long, complex waveforms with up to 256 steps
• The 9-inch capacitive touch screen works like a smart phone and has short-cuts to frequently used settings
• Built-in ArbBuilder lets you create and edit arbitrary waveforms on the instrument, eliminating the need to connect to a PC
• Outputs are protected from over voltage and current to minimize potential instrument damage
• Built-in Double Pulse Test application to generate voltage pulses with varying pulse widths onto the DUTs

Analog Channels	2
Output Frequency	100 MHz
Record Length	16 MSa/ch
Sample Rate	1 GS/s
Vertical Resolution	14 bit

The AFG31102 is a high-performance AFG with built-in arbitrary waveform generation, real-time waveform monitoring, and the largest touchscreen on the market. Providing advanced waveform generation and programming capabilities, waveform verification, and a modern touch-screen interface, the new AFG31102 is sure to delight and simplify the job of every researcher and engineer.
Key performance specifications

• 1 channel
• Output amplitude range 1 mVP-P to 10 VP-P into 50 Ω loads

Basic (AFG) mode

• 50 MHz sine waveforms
• 14-bit vertical resolution
• Built-in waveforms include sine, square, ramp, pulse, noise, and other frequently used waveforms
• Sweep, Burst, and Modulation modes (AM, FM, PM, FSK, and PWM)

Advanced (Sequence) mode

• Continuous mode (optional Sequence, Triggered and Gated modes)
• 16 Mpts arbitrary waveform memory on each channel (128 Mpts optional)
• Up to 256 steps in sequence mode with loop, jump and wait events
• Variable sampling clock 1 µSa/s to 2 GSa/s

Features and benefits

• Patented InstaView™ technology enables engineers to see the actual waveform at the Device Under Test (DUT) in real time, without the need of an oscilloscope and probe, eliminating the uncertainty caused by mismatched impedance Sequencing option adds the ability to program long, complex waveforms with up to 256 steps
• The 9-inch capacitive touch screen works like a smart phone and has short-cuts to frequently used settings
• Built-in ArbBuilder lets you create and edit arbitrary waveforms on the instrument, eliminating the need to connect to a PC
• Outputs are protected from over voltage and current to minimize potential instrument damage
• Built-in Double Pulse Test application to generate voltage pulses with varying pulse widths onto the DUTs

Analog Channels	2
Output Frequency	100 MHz
Record Length	16 MSa/ch
Sample Rate	1 GS/s
Vertical Resolution	14 bit

The AFG31251 is a high-performance AFG with built-in arbitrary waveform generation, real-time waveform monitoring, and the largest touchscreen on the market. Providing advanced waveform generation and programming capabilities, waveform verification, and a modern touch-screen interface, the new AFG31251 is sure to delight and simplify the job of every researcher and engineer.
Key performance specifications

• 1 channel
• Output amplitude range 1 mVP-P to 10 VP-P into 50 Ω loads

Basic (AFG) mode

• 50 MHz sine waveforms
• 14-bit vertical resolution
• Built-in waveforms include sine, square, ramp, pulse, noise, and other frequently used waveforms
• Sweep, Burst, and Modulation modes (AM, FM, PM, FSK, and PWM)

Advanced (Sequence) mode

• Continuous mode (optional Sequence, Triggered and Gated modes)
• 16 Mpts arbitrary waveform memory on each channel (128 Mpts optional)
• Up to 256 steps in sequence mode with loop, jump and wait events

Features and benefits

• Patented InstaView™ technology enables engineers to see the actual waveform at the Device Under Test (DUT) in real time, without the need of an oscilloscope and probe, eliminating the uncertainty caused by mismatched impedance Sequencing option adds the ability to program long, complex waveforms with up to 256 steps
• The 9-inch capacitive touch screen works like a smart phone and has short-cuts to frequently used settings
• Built-in ArbBuilder lets you create and edit arbitrary waveforms on the instrument, eliminating the need to connect to a PC
• Outputs are protected from over voltage and current to minimize potential instrument damage
• Built-in Double Pulse Test application to generate voltage pulses with varying pulse widths onto the DUTs

Analog Channels	1
Output Frequency	250 MHz
Record Length	16 MSa/ch
Sample Rate	2 GS/s
Vertical Resolution	14 bit

Usually, generating a range of signals requires investment in a high-end signal generator. Introducing the Tektronix AFG2021. With 20 MHz bandwidth, 14-bit resolution, and 250 MS/s sample rate, the AFG2021 Arbitrary / Function Generator can create simple and complex signals. But perhaps its most impressive feature is its entry-level price.
Features and benefits

• 1 uHz to 20 MHz frequency range - Covers most use cases for low end R&D, education, and ATE applications.
• 250 MS/s sample rate  and ±1ppm time base - Create precise, high fidelity signals with long term stability.
•  14 bit vertical resolution - Create complex waveforms with programmable voltage steps in the sub millivolt range.
• 3.5 inch color TFT display - The color display simultaneously shows waveforms parameters in text and graphical formats, giving you full confidence of your settings and allowing you to focus on your designs.
• Innovative UI based on the popular AFG3000 design - Provides quick and easy access to both commonly used features and more complex waveform editing functions.
• 2U height and half rack width form factor - Ideal for both bench top and rack mount applications.
• ArbExpress™  software - ArbExpress enables you to create and modify waveforms with ease.  Import waveforms seamlessly from your Tektronix oscilloscope or create them via the equation editor, free hand, point draw or waveform math tools.
•  SignalExpress™ software - SignalExpress provides an intuitive drag-and-drop interface  for basic instrument control,  data logging, data analysis, measurement trending and documentation.
• Standard 3 year warranty - Reduces the risk of line down situations and costly time to market delays.

Analog Channels	1
Output Frequency	20 MHz
Record Length	128k points
Sample Rate	250 MS/s
Vertical Resolution	14 bit

Bandwidth: 50 MHz
Analog Channels: 1

The 3390 Arbitrary Waveform/Function Generator provides both a full set of standard waveforms and custom waveform generation. The internal arbitrary waveform generator uses 14-bit resolution and a 125MSamples/second sampling rate to enable the creation of any type of waveform. The waveform can consist of up to 256k points. Up to four user-defined waveforms can be stored in the onboard non-volatile memory. Output standard waveforms from the front panel or create custom waveforms with the KiWAVE signal generation software.

Benefits

• Allows creating standard output waveforms with a single button press.
• Supports generating more precise pulses and square waves with sharp edges
• Simplifies controlling how much or how little noise is injected into the device under test.
• Enables creation of a wide range of signal transmission formats.
• Lets you test clock and data lines, simulate digital control signals, and send test protocols.
• Simplifies controlling multiple instruments from the same source, connecting multiple Model 3390s together, and synchronizing multiple signals of any shape
• Allows you to test easily over a range of frequencies and determine receive circuit response times.
• Helps define and manage waveforms, apply filters to waveforms, and display waveforms on a PC.
• Lets you select the optimum interface.

Key features

• Built-in function generator capability includes simplifies generating sine, square, triangle, noise, DC, ramp, and pulse waveforms
• Fast (5ns) rise/fall times
• Adjustable noise amplitude and offset
• Built-in AM, FM, PM, FSK, PWM modulation, or use an external modulation source
• 16-bit digital pattern generation
• Built-in 10MHz external time base
• Sweep and burst modes
• KiWAVE waveform creation software
• LAN, USB, and GPIB interfaces

Specifications

Model	Vertical Resolution	Sample Rate	Output Frequency	Bandwidth	Analog Channels
3390	14 bits	125MS/s	1µHz – 50MHz	50MHz	1