Search
Search Criteria
Products meeting the search criteria
Tektronix P6251 1 GHz High-voltage Differential Probe with TekProbe-BNC Level II Interface (TDP1000, TDP0500, P6251)
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes provide excellent high-speed electrical and mechanical performance required for today's Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed digital system designs.
Applications
• High-speed switch mode power supply design
• CAN/LIN bus design
• Digital design and characterization
• Manufacturing engineering test
• Research and development
High-voltage differential probes
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes are specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC Interface. These probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:
• Outstanding Electrical Performance
• Versatile Device-Under-Test Connectivity
• Ease of Use
Key features
oOutstanding electrical performance
o Selectable bandwidth-limiting filters
o DC reject
• Versatile DUT connectivity
o Small compact probe head for probing small geometry circuit elements
o Straight pin, square pin, solder down, variable pitch standard accessories
o Robust design for reliability
• Easy to use
o Provides automatic units scaling and readout on the oscilloscope display
o TDP1000, TDP0500
o Connect directly to oscilloscopes with the TekVPI™ probe interface
o Easy access to scope-displayed probe menu for probe setup control and operating status information
o Remote GPIB/USB probe control through the oscilloscope
o AutoZero – zeros out output offset
o P6251
o Connect directly to the TekProbe™ interface oscilloscopes, or to TekConnect® oscilloscopes using TCA-BNC adapter
Warranted characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Bandwidth (probe only)
TDP1000, P6251
1 GHz
TDP0500
500 MHz
Attenuation
5X, 50X
Differential mode input voltage
±42 v (DC + pk AC); 30 Vrms
Rise time (probe only)
TDP1000, P6251
≤350 ps
TDP0500
<700 ps
CMRR
>55 dB at 30 kHz
>50 dB at 1 MHz
>18 dB at 250 MHz (warranted at 50X attenuation)
Max input voltage (nondestruct)
±100 V (DC + pk AC)
Gain accuracy at DC
±2%
Typical characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Differential input capacitance
≤1 pF
Differential input resistance
1 MΩ
Sensitivity/noise level
5X attenuation
2 mVrms
10 mVrms(referred to the probe output)
50X attenuation
1 mVrms
50 mVrms(referred to the probe output)
Propogation delay
6.5 ns
Common mode input voltage
±35 v (DC + pk AC); 25 Vrms
Differential input offset range
TDP1000, TDP0500
±42 V (5X or 50X attenuation)
P6251
±4.25 V (5X attenuation)
±42 V (50X attenuation)
DC reject
5X attenuation
0.4 Hz
50X attenuation
4 Hz
Nominal characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Selectable bandwidth filter limits
TDP1000, TDP0500
100 Hz, 10 kHz, 1 MHz, Full
P6251
5 MHz, Full
Oscilloscope interface recommendations
TDP1000, TDP0500
TekVPI™ Probe 1
P6251
TekProbe BNC Level II
TekConnect® (TCA-BNC required)
1When using MSO/DPO2000/B series, the TekVPI Power supply (Tektronix part number, 119-7465-xx) and power cable is needed.
Power requirements
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
TDP1000, TDP0500
Powered directly by oscilloscopes with the TekVPI interface
P6251
Powered directly by the TekProbe-BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe-BNC oscilloscopes.
May also be powered through the 1103 TEKPROBE power supply for use with non-TekProbe interface instrumentation.
Physical characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Compensation box dimensions
Dimension TDP1000, TDP0500 P6251
in cm in cm
Height 1.6 4.1 1.0 2.6
Width 1.2 3.05 1.6 4.1
Length 4.2 10.7 3.2 8.13
Cable length 47.2 (inches), 1.2 (meters)
Weight
TDP1000, TDP0500 P6251
lb kg lb kg
0.320 0.146 0.360 0.163
Applications
• High-speed switch mode power supply design
• CAN/LIN bus design
• Digital design and characterization
• Manufacturing engineering test
• Research and development
High-voltage differential probes
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes are specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC Interface. These probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:
• Outstanding Electrical Performance
• Versatile Device-Under-Test Connectivity
• Ease of Use
Key features
oOutstanding electrical performance
o Selectable bandwidth-limiting filters
o DC reject
• Versatile DUT connectivity
o Small compact probe head for probing small geometry circuit elements
o Straight pin, square pin, solder down, variable pitch standard accessories
o Robust design for reliability
• Easy to use
o Provides automatic units scaling and readout on the oscilloscope display
o TDP1000, TDP0500
o Connect directly to oscilloscopes with the TekVPI™ probe interface
o Easy access to scope-displayed probe menu for probe setup control and operating status information
o Remote GPIB/USB probe control through the oscilloscope
o AutoZero – zeros out output offset
o P6251
o Connect directly to the TekProbe™ interface oscilloscopes, or to TekConnect® oscilloscopes using TCA-BNC adapter
Warranted characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Bandwidth (probe only)
TDP1000, P6251
1 GHz
TDP0500
500 MHz
Attenuation
5X, 50X
Differential mode input voltage
±42 v (DC + pk AC); 30 Vrms
Rise time (probe only)
TDP1000, P6251
≤350 ps
TDP0500
<700 ps
CMRR
>55 dB at 30 kHz
>50 dB at 1 MHz
>18 dB at 250 MHz (warranted at 50X attenuation)
Max input voltage (nondestruct)
±100 V (DC + pk AC)
Gain accuracy at DC
±2%
Typical characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Differential input capacitance
≤1 pF
Differential input resistance
1 MΩ
Sensitivity/noise level
5X attenuation
2 mVrms
10 mVrms(referred to the probe output)
50X attenuation
1 mVrms
50 mVrms(referred to the probe output)
Propogation delay
6.5 ns
Common mode input voltage
±35 v (DC + pk AC); 25 Vrms
Differential input offset range
TDP1000, TDP0500
±42 V (5X or 50X attenuation)
P6251
±4.25 V (5X attenuation)
±42 V (50X attenuation)
DC reject
5X attenuation
0.4 Hz
50X attenuation
4 Hz
Nominal characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Selectable bandwidth filter limits
TDP1000, TDP0500
100 Hz, 10 kHz, 1 MHz, Full
P6251
5 MHz, Full
Oscilloscope interface recommendations
TDP1000, TDP0500
TekVPI™ Probe 1
P6251
TekProbe BNC Level II
TekConnect® (TCA-BNC required)
1When using MSO/DPO2000/B series, the TekVPI Power supply (Tektronix part number, 119-7465-xx) and power cable is needed.
Power requirements
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
TDP1000, TDP0500
Powered directly by oscilloscopes with the TekVPI interface
P6251
Powered directly by the TekProbe-BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe-BNC oscilloscopes.
May also be powered through the 1103 TEKPROBE power supply for use with non-TekProbe interface instrumentation.
Physical characteristics
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Compensation box dimensions
Dimension TDP1000, TDP0500 P6251
in cm in cm
Height 1.6 4.1 1.0 2.6
Width 1.2 3.05 1.6 4.1
Length 4.2 10.7 3.2 8.13
Cable length 47.2 (inches), 1.2 (meters)
Weight
TDP1000, TDP0500 P6251
lb kg lb kg
0.320 0.146 0.360 0.163
Tektronix TDP0500 500 MHz high-voltage differential probe with TekVPI interface (TDP0500)
The TDP0500 is a high voltage Differential Probe specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface or TekProbe BNC. 500MHz probe with TekVPI interface. Easy to use - provides automatic units scaling and readout on the oscilloscope display. Easy access to scope-displayed probe menu for probe setup control and operating status information. Remote GPIB/USB probe control through the oscilloscope.
• Outstanding electrical performance
• Zeros out output offset
• Versatile DUT connectivity
• Robust design for reliability
A high voltage differential probe is used for measuring the voltage difference between two test points where neither test point is at ground. High voltage differential probes from Tektronix can be used for signals up to 6000 V. These probes are the best choice for making non-ground referenced, floating or isolated measurements in large part due to their common mode rejection capability. These products are designed, manufactured, and serviced by Tektronix.
• Attenuation: 5X / 50X
• Bandwidth: 500 MHz
• Input Impedance: 1 MΩ || ≤ 1 pF
• Maximum Voltage
o 50X: ± 42 V
o 5X: ± 4.2 V
• Selectable Bandwidth-limiting Filters
Applications
Test & Measurement, Power Management, Communications & Networking, Embedded Design & Development
Footnotes
Calibration services available for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration page for more details.
Key performance specifications
Bandwidth (Probe only) 500 MHz
Attenuation 5x, 50x
Rise Time (Probe only) <700 ps
Differential Input Capacitance <1 pF
Differential Input Resistance 1 MΩ
CMRR >55 dB at 30 kHz
>50 dB at 1 MHz
>18 dB at 250 MHz (warranted at 50x attenuation)
Sensitivity/Noise Level 2 mV RMS (5x attenuation)
1 mV RMS (50x attenuation) referred to the probe output
10 mV RMS (5x attenuation)
50 mV RMS (50x attenuation) referred to the probe input
Differential Mode Input Voltage ±42 V (DC + pk AC); 30 V RMS
Common Mode Input Voltage ±35 V (DC + pk AC); 25 V RMS
Input Offset Range ±42 V (5x or 50x attenuation)
Max Input Voltage (Nondestruct) ±100 V (DC + pk AC)
Selectable Bandwidth Filter Limits 100 Hz, 10 kHz, 1 MHz, Full
DC Reject 0.4 Hz (5x)
4 Hz (50x)
Gain Accuracy at DC ±2%
Propagation Delay 6.5 ns
Scope Interface TekVPI™ Probe Interface
Tech Specs
Test Equipment General Attributes
Product Height 3.40 IN
Product Length 14.70 IN
Product Width 12.80 IN
Shipping Weight 2.80 LBS
Country of Origin United States
Shipping Height 3.40 IN
Shipping Length 14.70 IN
Shipping Width 12.80 IN
• Outstanding electrical performance
• Zeros out output offset
• Versatile DUT connectivity
• Robust design for reliability
A high voltage differential probe is used for measuring the voltage difference between two test points where neither test point is at ground. High voltage differential probes from Tektronix can be used for signals up to 6000 V. These probes are the best choice for making non-ground referenced, floating or isolated measurements in large part due to their common mode rejection capability. These products are designed, manufactured, and serviced by Tektronix.
• Attenuation: 5X / 50X
• Bandwidth: 500 MHz
• Input Impedance: 1 MΩ || ≤ 1 pF
• Maximum Voltage
o 50X: ± 42 V
o 5X: ± 4.2 V
• Selectable Bandwidth-limiting Filters
Applications
Test & Measurement, Power Management, Communications & Networking, Embedded Design & Development
Footnotes
Calibration services available for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration page for more details.
Key performance specifications
Bandwidth (Probe only) 500 MHz
Attenuation 5x, 50x
Rise Time (Probe only) <700 ps
Differential Input Capacitance <1 pF
Differential Input Resistance 1 MΩ
CMRR >55 dB at 30 kHz
>50 dB at 1 MHz
>18 dB at 250 MHz (warranted at 50x attenuation)
Sensitivity/Noise Level 2 mV RMS (5x attenuation)
1 mV RMS (50x attenuation) referred to the probe output
10 mV RMS (5x attenuation)
50 mV RMS (50x attenuation) referred to the probe input
Differential Mode Input Voltage ±42 V (DC + pk AC); 30 V RMS
Common Mode Input Voltage ±35 V (DC + pk AC); 25 V RMS
Input Offset Range ±42 V (5x or 50x attenuation)
Max Input Voltage (Nondestruct) ±100 V (DC + pk AC)
Selectable Bandwidth Filter Limits 100 Hz, 10 kHz, 1 MHz, Full
DC Reject 0.4 Hz (5x)
4 Hz (50x)
Gain Accuracy at DC ±2%
Propagation Delay 6.5 ns
Scope Interface TekVPI™ Probe Interface
Tech Specs
Test Equipment General Attributes
Product Height 3.40 IN
Product Length 14.70 IN
Product Width 12.80 IN
Shipping Weight 2.80 LBS
Country of Origin United States
Shipping Height 3.40 IN
Shipping Length 14.70 IN
Shipping Width 12.80 IN
- 1